Back to top

Kevlar Aramid Rope

Our company has brought the Kevlar aramid ropes for the clients. These ropes are used for the glass tempering furnaces and are preferred in industrial sector for their high tensile strength. The resistance against heat and thermal degradation also adds a major benefit to their use. The aramid is a low stretch material with high strength fiber that is used for making standard quality Kevlar aramid ropes. These are also chemically stable and physically durable. The furnace industries significantly demand for these resilient and ropes in bulk quantity. 

Square Kevlar Tapes for tamglass furance 5.5x5.5mm

Square Kevlar Rope is provided with excellent mechanical properties having 3.6 GPA strength and 131 GPA elongation modulus with elongation at break is 2.8% -3.5%. Its strength, the weight-to-weight ratio is 5-6 times better than a steel wire. The modulus is 2-3 times greater than steel wire or glass fiber and 7 times higher than nylon.

1. Application:

Wear resistance, heat resistance, chemical resistance, good mechanical properties, etc.

Uses: is mainly used for: glass tempering furnace roller conveyor. tempering furnace roller winding. Kiln furnace industrial furnace insulation, etc.

2. Main Features:

Low specific gravity

The product has a density of only 1.36g/cm3 and is lightweight and easy to transport and replace.

Low extension

The product has a low elongation of only 3.6% and is not easily deformed during long-term use.

Kevlar rope

Kevlar Aramid Ropes used on Glass Tempering Furnace 5.5 x 5.5mm


1. Application:

Wear resistance, heat resistance, chemical resistance, good mechanical properties, etc.

Uses: is mainly used for: glass tempering furnace roller conveyor. tempering furnace roller winding. Kiln furnace industrial furnace insulation, etc.

 

2. Main Features:

Low specific gravity

The product has a density of only 1.36g/cm3 and is lightweight and easy to transport and replace.

Low extension

The product has a low elongation of only 3.6% and is not easily deformed during long-term use.

Kevlar rope cord

Kevlar Aramid Ropes used on Glass Tempering Furnace 5.5 x 5.5mm


1. Application:

Wear resistance, heat resistance, chemical resistance, good mechanical properties, etc.

Uses: is mainly used for: glass tempering furnace roller conveyor. tempering furnace roller winding. Kiln furnace industrial furnace insulation, etc.

 

2. Main Features:

Low specific gravity

The product has a density of only 1.36g/cm3 and is lightweight and easy to transport and replace.

Low extension

The product has a low elongation of only 3.6% and is not easily deformed during long-term use.

Twisted Flat Rope

Twisted Flat Rope is designed using quality nylon to provide the durability and strength required to provide high performance even the toughest outdoor conditions. It can be slide easily between as well as through tight spaces. Its hard-wearing webbing can be used as the typical rope to provide the best results. This Twisted Flat Rope is resistant to moisture, hot and cold temperatures to ensure no wear and tear for years to come. Moreover, it is perfect for holding surface tension and heavy-loads.

Market: Worldwide

Round Rope

Round Rope is a glass tempering furnace roller winding product woven from DuPont's original Kevlar fiber to ensure five times more strength than steel of the same quality and one-fifth density than steel. It is durable, wear-resistant and flexible in nature that can penetrate the knife. It can resist high temperature up to 330 ℃ and short-term temperature up to 580 ℃. This Round Rope is widely used in tempered glass furnaces, drying equipment, fireproof track ropes, O-type transmission tapes, etc.

Market: Worldwide

X